How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

This is a BMW E60. The transmission control module has been replaced with one from a BMW X5 or X6.  The new control module has ISN on it.
So if I start the car, it cannot engage gear at all and it shows the fault code on diagnostic tool says immobilizer on the control module disables something like that.

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Here we connect CGDI Prog BMW programmer with vehicle via OBD.

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Turn switch off then go to Other->BMW EGS Change->6HP (E)->OBD Mode

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Read EGS status

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Read EGS ISN
When try to read EGS ISN, it fails and says Currently EGS has no ISN code.

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Close and try if it can go to bench option.

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Need to connect on bench.

It is on bench with an external connector

Now we are connecting an external wiring with power supply as if it is on the bench.

See also
How to Calculate Nissan 22-digit Rolling Code with OBDSTAR?

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Make sure you have a good network connection.

Turn off power completely then we will connect the connector that is coming from the vehicle.

Read EGS status with CGDI BMW

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Read EGS ISN

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Select EGS ISN need to cleared

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

Clear EGS ISN successfully

How to Clear BMW ZF6HP EGS ISN with CGDI BMW?

We connected the connector of the transmission itself from the car and now it engaged gear and reverse.

Done.

www.obdii365.com

Read also:

Rating
( No ratings yet )
Like this post? Please share to your friends: