2017 Jaguar XFAll Keys Lost successfully done with Autel IM608 Pro via OBD. Generated the Key via “Key Clone AKL”. 5 Minute Job. This feature was released with the last Mega Update. You can ONLY use an Autel Universal Key. I mentioned “Autel Only” because the instructions say to use Autel Only. But my locksmith buddy said that it worked fine with the aftermarket JLR Fobs. I lishi’d the door (HU101) and gave her a metal head key to hang on her keychain. Just incase the battery dies. If battery empty in this case you can’t put this key in emergency slot! You must tap the transponder on the side of the steering wheel in order to sync the fob with the vehicle after the Dealer Key is generated. This model is an X260, coil is located on the left side of the steering wheel. 2012+ X250s have a coil on the underside of the steering wheel shroud. 2011 & Below X250s have the slot. About 4 Months ago I was pulling out KVMs back to back. This feature is very very useful. You can do this job with Londsor as well, their keys look like jlr keys.
Rating
( No ratings yet )
Like this post? Please share to your friends:
You may also like
Problem: After the most recent update, the CGDI K2 key tool device only boots up to
Contents1 Tools Required2 Step-by-Step Key Programming Guide2.1 1. Generate remote using iKey2.2 2. Prepare
Question: Will Yanhua Mini ACDP2 read ISN code from BMW R chassis N16 DME?
Question: How to connect Autel IM508S or IM608 II with digital camera? To use
Problem: failed during make add key BMW X2 with Autel IM508S and Godiag BDC/FEM
As titled, can Autel AT100 super chip be reset and reused? and how to