How to decode HU162T(9) and HU162T (10) door lock on new VW Audi group cars using Lishi HU162t auto pick and decoder 2 in 1.
Decode HU162T (9)
Decode HU162T (10)
Decode HU162T 9 Cuts with Lishi
Lishi decoder used: Lishi HU162T (9)
The Original Lishi HU162T 9-Cut 2-in-1 is a stainless steel tool that is designed to 9-Cut auto Door & Trunk Locks on 2015+ V-olkswagen’s & Audi’s. Also, it is a perfect choice for a professional locksmith to use because the job can be easily completed within 3 minutes.
-
For: Door & Trunk Only
-
Tool Spaces: 1-9 (6-Cuts, 3 Side Cuts)
The Following Vehicles Can be Unlocked With This Opener:
- 2015 – 2021 Volkswagen Golf
- 2015 – 2021 Volkswagen GTI
- 2015 – 2021 Volkswagen Jetta
- 2018 – 2021 Volkswagen Atlas
- 2017 – 2021 Volkswagen Tiguan
- Various Other Audi / Volkswagen Models 2015 and up with HU162T Blade Keyway
Decode procedure:
1. Insert your Lishi tool into the lock correctly
Insert correctly, number 4 is springing.
2. Use the top lifter for position 1 and the back lifer for position 2 and 3
3. The first reading is in the unpicked state
With no tension on the tool, simply position the top lifter at position 1 and push the wafer to its stop position.
It will stop on a reading of 60 or 90. You will not get a 30 reading in the unpacked state.
Repeat this for positions 2 and 3 with the back lifter and write your readings on the table.
4. Pick your lock
Hold the lock in the open position and follow the same process whilst the lock is in the picked open position
In the picked position, you will only get reading of 30 or 60. You will not get a 90 reading at all.
5. Whilst the lock is in the picked open position, finish to write all left reading on the table.
Now you can cut key with Xhorse Condor or Dolphin XP005 key cutting machine.
Decode HU162T 10 Cuts with Lishi
Lishi decoder used: Lishi HU162(10)
- Lishi HU162T(10) 2 in 1 is designed for New Audi 2016 [10 Cut], for New BMW 2016 [10 CUT – 2 track internal (6 cuts) + side cut (4 cuts)]
- For VW, Audi, Seat, Skoda models 2015 onwards- Using proximity keys
1. Insert your Lishi tool into the lock correctly
Insert correctly, number 5 is springing.
2. Use the top lifter for positions 1 and 2 and the back lifer for positions 3 and 4
3. The first reading is in the unpicked state
With no tension on the tool, simply position the top lifter at position 1 and push the wafer to its stop position.
It will stop on a reading of 60 or 90. You will not get a 30 reading in the unpacked state.
Repeat this for position 2. Use the back lifter for positions 3 and 4.
Write your readings on the table.
4.
Pick your lock
Hold the lock in the open position and follow the same process whilst the lock is in the picked open position
In the picked position, you will only get reading of 30 or 60. You will not get a 90 reading at all.
5. Whist the lock is in the picked open position, finish to write all left reading on the table.
Now you can cut key with Xhorse Condor or Dolphin XP005 key cutting machine.
