VW Crafter Add Key What Key Programmer to Use?

Have a VW crafter and need to add new key. what can I use to make dealer key and learn key?

Also, I “want” to have possibility to maybe do some keys from early 2000 to around 2015.

most keys will be European cars.

You can try any of the following key programmer and follow the instruction:

With FVDI

With FVDI you can make the dealer if car is “older” but you will need a TP23 Chip to be more easy for you.

For many cheaper Transponder Types (id46) I use FVDI2018 (maybe I even own a rip off of it), but for Opel, Renault and Ford it definitely worked well. (don’t use it for Benz or Audi).

Brand/Model of car : VW CRAFTER

– Year of car : 2010

– Feature in relation : add key

– Version of FVDI : 2015 v18

– Result :

I read ecu – OK

I see CS and PIN

Fvdi writes CS to the new key

Then I choose 2 keys to add

Original key and new _ stopped working

Writes CS to a new key to another device

I repeat the procedure FVDI says wait 5minutes

success

Key added

Xhorse VVDI2

The Xhorse keytool max alone will not do the job. If you want to enter this business you will need more than one device.
For the VW Group (VW, Skoda, Seat, Audi), BMW and Peugeot I use Xhorse VVDI2. For Benz my favorite Tool is also from Xhorse, the MB Tool.

With Zedbull

this happened to me rather by accident , I read eis from crafter with xprog , then i took a id48 chip and used zedbull to add key , was just playing around on a junk yard car with all keys lost that was waiting for a lockset , the blade on the crafter key is only for door locks , so any flat bar will turn the ign i used another crafter key blade , well WTF the thing started ,even if u can get the pin from the eis and have a precoded id48 u should be able to add key with old vaspc