Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Tutorial: GM key programming using GM scan tool and SPS (Service Programming System) online subscription. Model example: Chevrolet Tahoe 2016 (the procedure can be applied to other GMs) Tools needed: A GM scanner (GM MDI, GM MDI2, VXDIAG GM) GM Online SPS programming subscription Original remote and a new remote key (add a remote) Procedure: (* Click to enlarge images) After connect MDI2 interface and built connection


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Access SPS programming


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Select vehicle model: Chevrolet Tahoe 2016 Light duty truck Communicating with the GM MDI


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Detect VIN and enter job card number to access (There is a field activation for this vehicle)


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Select controller: Keyless Entry Control Module and press Next


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Select special function: Program Transponder or Remote Key (Add key) Turn off all power consuming components after each ignition cycle.


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Insert next key in the transmitter pocket and press Next
Place all other keys outside of the vehicle


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Wait it counts down from 12 mins to 0


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

All transponder keys have to be synchronized with the vehicle.


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Follow steps below to sync key
1.Remove the key from the transmitter pocket
2.Press the Lock button on key
3.Press the Unlock button on key and press Next


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Starts to program next key
Insert next key in the transmitter pocket and press Next
Place all other keys outside of the vehicle


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Press Start/Stop button and start the engine Current Power Mode Status: OFF Wait 5 seconds


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Press Start/Stop button and start the engine Current Power Mode Status: RUN Follow steps below to sync key
1.Remove the key from the transmitter pocket
2.Press the Lock button on key
3.Press the Unlock button on key and press Next


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

The immobilizer procedure completed successfully.


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Check if the new key can start engine. For a vehicle with manual transmission, if the engine does not start, please check that the clutch pedal is learned.


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Action completed. Clear DTCs.


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS


			Program Chevrolet Tahoe 2016 Remote Key by GM MDI and SPS

Perform account for wireless charger and disable passive enter calibration programming until finished. The whole process is done. www.obdii365.com  http://blog.obdii365.com/2019/12/22/chevrolet-tahoe-2016-key-programming-through-sps/

Rating
( No ratings yet )
Like this post? Please share to your friends: