How to use Lonsdor Toyota Smart Key Emulator Offline Calculation

From now on Lonsdor K518ISE key programmer green, black and orange SKE-LT smart key emulators DON’T need to connect to online server to calculate pass to do Toyota/Lexus all smart keys lost by OBD. Here’s the Help file of these emulators.

How to use Lonsdor Green: SKE-LT-DST80(98) Smart Key Emulator?

Toyota Lexus – Smart key Type 2- All key lost offline calculation Helps

Green: SKE-LT-DST80(98)-Supports 98 smart key

This help file basically includes 4 parts: Function, Operation, Attention, and

Reference.

Functions

Operational process for all key lost

Please confirm whether emulator key (SKE) is bound to K518 device beforehand.

Backup EEPROM data-> Generate new data-> Dismantle immo box and write

new data to EEPROM-> Generate SKE-> Add/delete smart key

Backup original EEPROM immo data.
Use backup data to generate new data.
System certify and generate new data automatically, and program SKE to become an available key, which can open dashboard, before key programming.
Add a smart key.
Delete programmed key.
Bind emulator key: Require to bind all SKE to K518 for the first use.

Operation

Operational process for all key lost

Please confirm whether K518 is bound to emulator key (SKE).

Backup EEPROM immo data-> Generate new data-> Dismantle immo box and

write new data to EEPROM-> Generate SKE-> Add/delete smart key

Backup EEPROM data

This function can backup EEPROM data.
System is receiving data, please wait patiently.
Please input data filename and save succeed.
EEPROM data backup complete, please select “generate EEPEOM data”

function to generate specific data.

Generate EEPROM data

This function can generate EEPROM data for vehicle.
Continue to select EEPROM data of smart key backed up before.
Searching data… Please input filename of new data.
Generating EEPROM data complete. Data saved in K518filefeature_1013.

Please write newly-generated data to EEPROM（IC003）in smart immo box of

vehicle. More details, refer to “Reference”.

89990-0N010 smart immo box (see below pic)

89990-06060smart box(see below pic)

Note: Install back smart box when data writing complete.

Generate emulator key

It’s required to write newly-generated data to EEPROM in smart immo box.

Dashboard is lit up after emulator key (SKE) generated.

This function can generate a backup master key when all keys are lost, which

can open dashboard to add keys.

Insert bound SKE(corresponding color/type) into K518 card slot, and press

round button on the key.

System is building configuration… Please wait patiently.
Key generation complete. Please press round button on it and put it against

ignition switch of vehicle, and try to open dashboard. If the dashboard is lit up,

please use SKE to program and add new keys.

Add smart key

Put emulator key or available key against ignition switch and switch ignition ON

till dashboard is lit up.

System communication, getting info about key numbers…
Put registered smart key against start button of vehicle, and remove it when

buzzer beeps once.

Please put smart key to be registered at start button of vehicle in 30 seconds,

and remove it when buzzer beeps twice.

Please wait till key registration complete. Operation succeed.

Delete smart key

Put emulator key or available key close to ignition switch and switch ignition

ON till dashboard is lit up.

System communication, getting key numbers…
Put back of registered smart key close to vehicle start button, and remove it

when buzzer beeps once.

System is deleting key… Deleting succeed. Smart key (away from start button)

will be deleted.

Bind emulator key

This function can bind smart key emulator (SKE-LT series) to K518 host.
Please put key to be bound into K518 host slot.
System is binding… When complete, continue to program all keys lost.

Newly-generated data must be written to EEPROM chip in smart box.Attentions

Dashboard can be lit up after simulate key is generated.

Bind key/generate key: Change placement of simulate key to sense if failed.

98 card smart box is located at back of storage box at passenger seat.

How to use Lonsdor K518ISE Smart Key Emulators SKE-LT-DST40(94/D4) SKE-LT-DSTAES Chip 39 (128bit)?

Lonsdor K518 key programmer Toyota Lexus – Smart key Type 1 – All key lost – Helps

Applied to: Toyota/Lexus the 5th emulator Orange SKE-LT-DSTAES Chip 39 (128bit) & Black SKE-LT-DST40(94/D4)

This help file basically includes 4 parts: Function, Operation, Attention, and

Reference.

Functions

Operational process for all key lost

Please confirm whether emulator key (SKE) is bound to K518 device beforehand.

Backup EEPROM data-> Generate new data-> Dismantle immo box and write

new data to EEPROM-> Generate SKE-> Add/delete smart key

Backup original EEPROM immo data.
Use backup data to generate new data.
System certify and generate new data automatically, and program SKE to

become an available key,which can open dashboard.,before key programming.

Add a smart key.
Delete programmed key.
Bind SKE: Require to bind all SKE to K518 for the first use.

Operation

Operational process for all key lost

Please confirm whether K518 is bound to emulator key (SKE).

Backup EEPROM data–> 2. Generate emulator key (SKE)–> 3. Use SKE to

switch ignition ON–> 4. Add smart key

Operation

Backup EEPROM immo data.
Generate a SKE for emergency use.
Put the SKE close to start button and dashboard will be lit up.
Add a smart key.
Delete a smart key.

Bind emulator key

This function can bind emulator key (SKE-LT series) to K518 host.
Please insert key to be bound into the host slot.
System is binding… Program key when key binding complete.

Backup EEPROM data

This function can backup EEPROM data.

Generate SKE for emergency when data backup complete.

Insert SKE to switch ignition ON and open dashboard.

Receiving vehicle immo data… Please wait patiently.
Please name EEPROM backup data.
Data backup succeed.Please select “generate emulator key”function to generate a spare key for emergency.

Generate emulator key

This function can generate a spare master key when all keys are lost, which can

open dashboard to add other keys.

Receiving local backup data…
System shows current data and notify key type.
Insert bound emulator key (corresponding color/type) into K518 host slot, and press

round button on the key.

Generating SKE … Please wait for 5 minutes patiently.
When SKE is generated,press round button on it and put it against start button of

vehicle, and try to open dashboard.If the dashboard is lit up, please use SKE to

program and add new keys.

Add smart key

Put SKE or available key against ignition switch and switch ignition ON till

dashboard is lit up.

System communication, getting info about key numbers…
Put registered smart key against vehicle start button, and remove it when

buzzer beeps once.

Put smart key (to be registered) at start button of vehicle in 30 seconds, and

remove it when buzzer beeps twice.

Please wait till key registration complete. Operation succeed.

Delete smart key

Put emulator key or available key close to ignition switch and switch ignition ON till

dashboard is lit up.

System communication, getting info about key numbers…
Put back of registered smart key close to vehicle start button, and remove it

when buzzer beeps once.

System is deleting key… Deleting succeed. Smart key (away from start button) will be deleted.

Bind emulator key: Require to power on the device when put emulator key into K518 host slot.

System will read backup data of vehicle to generate emulator key and prompt

to choose corresponding key type(refer to back of the emulator).

4.For Carola/Vios/Zelas all key lost, programming is not available in a state of alarm.

Reference

Chip type	94/D4(SKE black), 88/A8(SKE red), A9(SKE blue), 39(SKE orange)
Remote control type	Specific smart key
Key embryo No.	Specific smart key
Password required or not	Not required.
Remote control	Generate automatically when smart key programming complete.
OBD position	Under steering wheel
Reference pics	Smart key appearance for part of Toyota series Toyota series： 2008 Reiz 0111 smart key 2008 RAV4 0111 smart key 2008 Prado 0140 smart key 2008 Camry 0140 smart key 2008 Corolla 0111 smart key 2008 Cruiser A433 smart key 2008 Alfa smart key 2008 Previa smart key 2008 Lexus 0140 smart key 2010 Camry 3370 smart key 2010 Prado 3370 smart key 2010 Reiz 5290 smart key 2010 Crown 5290 smart key 2010 Lexus 3370 smart key 2010 Camry 0020 smart key 2012 Reiz 7930 smart key 2012 Crown 7930 smart ky 2012 Prado 7930 smart key 2012 RAV4 7980 smart key 2013 Lexus ES GS IS smart key 2014 RAV4 2-button smart key 2014 RAV4 3- button smart key 2014 New vios/Yaris L smart key Lexus smart key，select from PCB type： 89904-30291（0140 PCB ES350 old ver. ) 89904-50430（3370 PCB ES240/ES350 new ver.） 89904-48321 (5290 PCB PX270） 89904-28132（0780 PCB 5-button Previa） 89904-6071 （A433 PCB Cruiser） 89904-0041(0111PCB RAV4 3-button Reiz Carola)

http://www.lonsdor.org/