Guide to program dealer key on VW Touareg 2011 5th generation immobilizer when all keys lost by using OBDSTAR X300 DP (Key Master DP) tablet key programmer and RFID VAG 4th & 5th immo programming adapter.
Procedure:
Well connect OBDSTAR X300 DP and RFID adapter, VCI adapter with vehicle
Select Diag Program->VW/AUDI/SKODA/SEAT->VW/AUDI/SKODA/SEAT 33.03
Please connect VCI to main unit by USB to keep stability of vehicle communication
Select VW->Program Keys->5 generation immo
First update OBDSTAR RFID adapter to latest version. If X300 DP tablet shows the hardware has been the latest version. Press OK to go back.
Select 5th immo New Touareg->Read Immo Data
Switch ignition on
If all key lost, please turn on the headlight and depress brake, then press (ENT) to continue
communicating
Reading immo data…
Save immo data as BIN format, e.g “KKKKKKKK.BIN”
Press OK to confirm
Select Show IMMO Data
Select bin file just saved
OBDSTAR X300 DP key programmer will display VIN, key number etc information
Select Make Dealer Key and bin file
Put a valid key into RFID and make sure the key is effective, otherwise, the programmed key is unable to start the vehicle
Press YES to continue
After insert first key, the RFID indicator will flash. Then insert second valid key
Written success
Select Program Keys and choose bin file
Note: After recognized by vehicle, the key will be locked and unable to unlock. Continue to go on?
Press YES to continue
Enter key number to be programmed: 2
Press OK
Please turn ignition on, Press ENT to continue
Press OK
Insert new key orderly and turn on ignition switch for smart system, aim backside of key to the key identification mark area and turn OFF->ON to recognize key
(1/2)
succeed to recognize key
key learning mode is ending
Learn success
Test the new key.
Done!
http://www.obdii365.com/producttags/obdstar-x300-dp.html
