Lishi VA2 Tool Pick and Decode a 2013 Citroen Berlingo

We have genuine Lishi VA2 T 2-in-1 and Smart VA2 2-in-1 auto Pick and Decoder for Peugeot/ Citroen. Check an example here on how to pick and decode a 2013 Citroen Berlingo lock with Citroen VA2 decoder.

 

You will need the latest version of the Genuine Lishi VA2  tool for the job. The facecap and lock have more recently been modified by the main dealer; the latest version of the tool has been altered to deal with these changes in the lock, where the earlier versions will not get a full insertion and would need the shoulder cutting back to fit properly.

The new lock is still 4 wafer positions and 6 heights on key series ABCDEF.

We begin by centering our pick arm and fully inserting the tool into the lock, ensuring a wafer is cleanly felt in position 1 and in position 6 – this confirms full entry. Once the tool has been inserted we apply a medium tension to the lifting arm in the clockwise direction and then we are ready to begin picking. Feel each position gently; any wafers with any movement at all should be left alone – we only pick solid binding wafers.

See also
What programer do Audi A6L pre-2011 all key lost

Picking Process

va2-auto-lock-psa-1

  • Position 1 is the 1st to bind and then pick.

va2 auto lock psa 1-1

  • Position 2 is the next to bind and pick.

va2 auto lock psa 2-2

  • Position 3 is the next to bind and pick.

va2 auto lock psa 3-3

  • Position 4 is the next to bind and pick.

va2 auto lock psa 4-4

  • Position 5 is the next to bind and pick.

va2 auto lock psa 5-5

  • Position 6 is the next to bind and pick.

va2 auto lock psa 6-6

Position 1 binds and picks again and the lock opens.

We must now hold the lock in the open position to decode.

 

Decoding Process

As a single lift tool we must decode in the opposite direction then we picked in – so holding the lock in the open position we begin the decode.

va2 auto lock psa 7-7

  • Position 1 decodes as a C cut.

va2 auto lock psa 8-8

  • Position 2 decodes as an A key cut.

va2 auto lock psa 9-9

  • Position 3 decodes as an E cut.

va2 auto lock psa 10-10

  • Position 4 Decodes as a B cut.

va2 auto lock psa 11-11

  • Position 5 decodes as an A cut.

va2 auto lock psa 12-12

  • Position 6 decodes as an E cut.

The decode is complete and gives us a key, in positions 1 to 6, bow to tip, of CAEBAE (the manufacturers code would be reversed as EABEAC).

We enter the cuts in the key machine and cut our key to a VA2 key blade.

Lishi tools

Rating
( No ratings yet )
Like this post? Please share to your friends: