Obd365.com engineer successfully programmed new keys for 2015 Ford Focus with Magic Wand transponder, Quickly & OBDSTAR X100 key programmer. Instructions and some pictures are provided below. Model: 2015 New Ford Focus Tools used: The original key and new key Quickly 4C/4D/46/48 code reader Magic Wand 4C 4D transponder chip generator OBDSTAR X100 Pro Key Programmer Procedure: Step 1- Test the original transponder key by Quickly transponder 
Put the original key into the slot in Quickly key copy machine Select Read or copy Wait and don’t remove the key 
The chip is 83 
Take the key and try to use it start the car It’s working 
Then take out the key Step 2- Test the new transponder key 
(the sane as how to test the original one above) The chip is 4D 70 
Try to start the car by the new key It doesn’t work 
Step 3- Format 4D 70 to 83 by Magic Wand Put the new key into the key reading & writing slot 
Press “8” “3” and “write” buttons, and green indicator displays 
Take the key away Step 4- Program the new key with OBDSTAR X100 key programmer (X100 Pro is connected and starts in preparation) select Ford-> Focus-> Type 2 (2014-) 
Select “programming a new key” 
Insert a new transponder key and switch ignition on Magic Wand close to ignition 
X300 is reading pin code… Switch ignition off Switch ignition on We own 3 keys to start this car Programming… Key information 
It will take 4 minutes to program… Get the pin code 
Now, we own 4 key to start this car Try to start the car by the new key It’s working 
Ford Focus 2015 new key programming procedure is done!
Put the original key into the slot in Quickly key copy machine Select Read or copy Wait and don’t remove the key The chip is 83 Take the key and try to use it start the car It’s working Then take out the key Step 2- Test the new transponder key (the sane as how to test the original one above) The chip is 4D 70 Try to start the car by the new key It doesn’t work Step 3- Format 4D 70 to 83 by Magic Wand Put the new key into the key reading & writing slot Press “8” “3” and “write” buttons, and green indicator displays Take the key away Step 4- Program the new key with OBDSTAR X100 key programmer (X100 Pro is connected and starts in preparation) select Ford-> Focus-> Type 2 (2014-) Select “programming a new key” Insert a new transponder key and switch ignition on Magic Wand close to ignition X300 is reading pin code… Switch ignition off Switch ignition on We own 3 keys to start this car Programming… Key information It will take 4 minutes to program… Get the pin code Now, we own 4 key to start this car Try to start the car by the new key It’s working 
Ford Focus 2015 new key programming procedure is done! 
